FDH-3901 Water Washout Characteristics Tester of Lubricating Greases

Scope
Applied standards: SH/T0109, ASTMD1264, IP215
Applied scope: testing grease resistance to water.
The grease sample loaded ball bearings, ball bearings and the bearing sleeve is provided with provisions within the gap, and turn to 600r/min + 30r/min speed. The control water in 38 DEG C or 79 DEG C to speed spray of fixed at 5ml / S + 0.5mL/s in the bearing sleeve, to within 60 min by water to wash away the grease quantity to measure the anti leaching ability of water of the grease.
Features
1. Water Washout Characteristics of Lubricating Greases is mainly composed by the temperature control system, water spray circulatory system, the transmission mechanism, white molten steel bath and shell Circulation system includes constant velocity carbon bearing gear pump, valves and flow meter directing a controlled water flow to a capillary (1mm) spray nozzle aimed at the bearing housing. Rugged 1⁄3hp drive motor rotates test bearing at600rpm while driving the circulation pump. A two pulley system permits independent pump operation to circulate water while heating it to test temperature. Mounted on a finished steel base with locating;
2. Using PID temperature control system thermostatic bath temperature control, temperature control range from room temperature to 100°C, a temperature control accuracy of ± 2 °C;
3. Visual display of set temperature and the actual temperature, easy temperature setting and the temperature difference correction;
4. The water spray circulatory system imported miniature magnetic circulation pump, low noise, long hours of continuous work;
5. Grease resistance to water washout analyzer transmission mechanism from the motor through a belt driven set of the bearing assembly;
6. Design aesthetic appearance, generous, reasonable structure design, easy to operate, the measurement accuracy of the results.
Technical Parameters
1, digital temperature control, temperature control range: bath temperature to 100°C, the temperature control precision is + - 1°C
2, precision velocity control system of water jet flow: 5 + 0.5ml/sec
3, bearing speed: 600 + 30r/min, specifications: 204 type bearing
4, input power: 1000W