Belt Tension Meter Market Share by Manufacturers, Types and Current Scenario 2018-2025
© Satish Inamdar
11th October 2018 - Global Belt Tension Meter Market is segmented into Types and Geographical regions. Belt Tension Meter measures belt tension by analyzing the harmonic individuality of a vibrating belt. Strum the belt like a guitar string and the meter takes care of the rest. Belts, like strings, vibrate at a particular natural frequency based on mass and span length. Gates Sonic Tension Meter simply converts this frequency into a measurement of tension.
The belt tension meter measures the natural frequency of vibration of a belt span. This frequency is straight related to the tension in the belt. As the tension in the belt is increased the frequency of vibration also increases. The belt is forced into vibration by quietly tapping or plucking it. The vibration is frequently not visible and also inaudible. The force/displacement type tension gauges were known to be clumsy, inaccurate, and in many cases difficult to use.
Access Belt Tension Meter Market Report with TOC @ https://www.millioninsights.com/industry-reports/belt-tension-meter-market
The gauge thus became the automotive industry standard to measure belt tension. Hence, the equipment uses the same principle for automated belt setting on elevated speed automotive engine production lines. A tension meter is a gauging device used to calculate tension in wires, cables, textiles, belts, and more. Meters commonly use a 3 roller system where the material travels through the rollers causing deflection in the center roller that is connected to an analog indicator or load cell on digital models.
Single roll tension sensors and sonic tension meters are the other types of tension meters. Tension may also be inferred from the frequency of vibration of the material under stress by solving the "Vibrating String Equation". Tension meters are available as handheld devices or as equipment for fixed installations. These are basically necessary to build up a tension-controlled closed loop. In recent years, some companies have introduced a revolutionary system for the setting of parking brake (hand brake) cables which is suitable for use with both disk and drum brake vehicles. Thus, the ability to set and to record the setting (for legislative reasons) has resulted in installation successes around the world.
The major manufacturers covered in this report
• Keeler
• Reichert
• TOPCON
• HAAG-STREIT
• Nidek
• Icare
• Kowa
• Tomey
• Sudershan Measuring & Engineering Private Limid
• Pix Transmissions Limited
• Wenzhou Bavrii Automotive Technology Co., Ltd. and many others
On the basis of product, this report displays the production, revenue, price, market share and growth rate of each type, primarily split into
• V belt
• Flat belt
• Round belt
• Ribbed belts
On the basis of the end users/applications, this report focuses on the status and outlook for major applications/end users, consumption (sales), market share and growth rate for each application, including
• Mechanical & Auto Repair
• Automotive Store (OEM)
• Others
Request a Sample Copy of Belt Tension Meter Market Report @
https://www.millioninsights.com/industry-reports/belt-tension-meter-market/request-sample
Geographically, this report is segmented into several key Regions, with production, consumption, revenue (million USD), market share and growth rate of Belt Tension Meter in these regions, from 2013 to 2025 (forecast), covering
• North America
• Europe
• China
• Japan
• Southeast Asia
• India
Visit Our Blog @ https://marketfuturereports.wordpress.com
Get in touch
At Million Insights, we work with the aim to reach the highest levels of customer satisfaction. Our representatives strive to understand diverse client requirements and cater to the same with the most innovative and functional solutions.
Contact Person:
Ryan Manuel
Research Support Specialist, USA
Email: ryan@millioninsights.com
Million Insights
Office No. 302, 3rd Floor, Manikchand Galleria,
Model Colony, Shivaji Nagar, Pune, MH, 411016 India
Phone: 91-20-65300184
Email: sales@millioninsights.com
The belt tension meter measures the natural frequency of vibration of a belt span. This frequency is straight related to the tension in the belt. As the tension in the belt is increased the frequency of vibration also increases. The belt is forced into vibration by quietly tapping or plucking it. The vibration is frequently not visible and also inaudible. The force/displacement type tension gauges were known to be clumsy, inaccurate, and in many cases difficult to use.
Access Belt Tension Meter Market Report with TOC @ https://www.millioninsights.com/industry-reports/belt-tension-meter-market
The gauge thus became the automotive industry standard to measure belt tension. Hence, the equipment uses the same principle for automated belt setting on elevated speed automotive engine production lines. A tension meter is a gauging device used to calculate tension in wires, cables, textiles, belts, and more. Meters commonly use a 3 roller system where the material travels through the rollers causing deflection in the center roller that is connected to an analog indicator or load cell on digital models.
Single roll tension sensors and sonic tension meters are the other types of tension meters. Tension may also be inferred from the frequency of vibration of the material under stress by solving the "Vibrating String Equation". Tension meters are available as handheld devices or as equipment for fixed installations. These are basically necessary to build up a tension-controlled closed loop. In recent years, some companies have introduced a revolutionary system for the setting of parking brake (hand brake) cables which is suitable for use with both disk and drum brake vehicles. Thus, the ability to set and to record the setting (for legislative reasons) has resulted in installation successes around the world.
The major manufacturers covered in this report
• Keeler
• Reichert
• TOPCON
• HAAG-STREIT
• Nidek
• Icare
• Kowa
• Tomey
• Sudershan Measuring & Engineering Private Limid
• Pix Transmissions Limited
• Wenzhou Bavrii Automotive Technology Co., Ltd. and many others
On the basis of product, this report displays the production, revenue, price, market share and growth rate of each type, primarily split into
• V belt
• Flat belt
• Round belt
• Ribbed belts
On the basis of the end users/applications, this report focuses on the status and outlook for major applications/end users, consumption (sales), market share and growth rate for each application, including
• Mechanical & Auto Repair
• Automotive Store (OEM)
• Others
Request a Sample Copy of Belt Tension Meter Market Report @
https://www.millioninsights.com/industry-reports/belt-tension-meter-market/request-sample
Geographically, this report is segmented into several key Regions, with production, consumption, revenue (million USD), market share and growth rate of Belt Tension Meter in these regions, from 2013 to 2025 (forecast), covering
• North America
• Europe
• China
• Japan
• Southeast Asia
• India
Visit Our Blog @ https://marketfuturereports.wordpress.com
Get in touch
At Million Insights, we work with the aim to reach the highest levels of customer satisfaction. Our representatives strive to understand diverse client requirements and cater to the same with the most innovative and functional solutions.
Contact Person:
Ryan Manuel
Research Support Specialist, USA
Email: ryan@millioninsights.com
Million Insights
Office No. 302, 3rd Floor, Manikchand Galleria,
Model Colony, Shivaji Nagar, Pune, MH, 411016 India
Phone: 91-20-65300184
Email: sales@millioninsights.com